Weifang micro-electrolysis filler filler manufacturer of micro-electrolysis - Pu Yan Wal Yun packing Advantages: Advantages: adapt to a wide range, good effect, low cost, easy operation and maintenance, does not consume power resources, fast response, the treatment effect is stable, not cause secondary pollution, improve the biodegradability of the wastewater can be achieved by chemical precipitation of phosphorus reduction can be restored except by heavy metals, can be used as pre-treatment biological treatment, sludge sedimentation and biological beneficial biofilm. Micro-electrolysis filler - Weifang Pu Yan Wal Yun micro-electrolysis filler strength problem: after high temperature sintering above 1050 ℃ makes the new iron-carbon micro-electrolysis filler physical strength can reach 1000kg / CM2, 20m enough to withstand water pressure. So filled with safe and reliable micro electrolysis tower. Micro-electrolysis filler - Yan Wal Yun Pu filler not harden reasons: compaction phenomenon is due to the traditional packing iron particles are not uniformly dispersed carbon particles sake, easy to rust between the iron particles harden. The new micro-electrolysis filler through a special high-temperature sintering process makes the packing of iron and carbon in the presence of iron-carbon inclusive framework, the iron skeleton and cross-cutting carbon chain, which makes cross-iron particles are uniformly dispersed carbon particles, it will not harden. Micro-electrolysis filler - Yan Wal Yun Pu packing physical structure: a porous architecture structure, size 2.0 * 2.5CM, the specific surface area 1.2㎡ / g, the proportion of 1.1 t / m3. Microelectrolysis selling proposition (1) offer reasonable prices and never false! (2) the customer sincere, never fool customers! (3) adhere to a win-win, not for the money entrepreneurs abandon conscience! Note Weifang Pu Yan Wal Yun Environmental Protection Technology Co., fillers (1) is not put to use micro-electrolysis filler, to keep dry, to avoid flooding or moisture. (2) has been put to use micro-electrolysis filler, works to stop after running still use water immersion, not exposed to the air, to avoid oxidation. (3) subject to periodic backwash filler, filler to improve the treatment effect. (4) filler between 3-4 ph value theoretically best, ph value, the lower the loss with a corresponding increase in the filler, but the setting for some of the waste water ph value to be determined on the basis of the test results