Iron-carbon micro-electrolysis reactor is an essential micro-electrolysis of water treatment equipment, the new iron-carbon micro-electrolysis filler shall be placed in the device reacts after the wastewater through the inner reactor reacts with the filler, so that more of organic matter reduction, to achieve the purpose of decontamination. Iron-carbon micro-electrolysis reactor many manufacturers, only good quality of the reactor in order to be fully reflect the occurrence of filler and water, so we have to choose a quality assurance manufacturers. Pu Yan Wal Yun Environmental Protection Technology Co., Ltd. is a specialized manufacturing iron-carbon micro-electrolysis reactor manufacturers, coupled with the new iron-carbon micro-electrolysis packing of its production, is the bane of high strength wastewater, can greatly reduce waste and chroma COD, improve the B / C ratio that improve wastewater biodegradability. To solve the traditional micro-electrolysis easy short flow, compaction, removal of instability, the problem of higher operating costs, access to the praise of the water treatment market, is the first choice of enterprises. 1. Micro-electrolysis reactor can be designed in a circular tank, square cell body or belt conveyor type reactor according to the site. Its volume according to the amount of water, generally circular tank diameter not exceeding 2m. 2. The water distribution system water distribution system in part by the lift pump, flow meter and piping and other components. 3. aeration system aeration system in part by fans, piping and valves and other components, air pressure can be adjusted according to micro-electrolysis reactor and piping design validation based on the amount of wind. Third, the application of new iron-carbon inclusive declining water quality electrolysis wastewater treatment technology has wide application range, good effect, long life, low cost and easy operation and maintenance features. This technique is particularly difficult in the high concentration organic wastewater biological treatment, with unique biodegradability increase in terms of wastewater. To some extent changed the investment conventional wastewater treatment systems, high operating cost disadvantages. The technology can be widely used in wastewater treatment in petrochemical, coal-coke, printing and dyeing, brewing, electroplating, medical and printed circuit board manufacturing industry and other fields. Fourth, installation and commissioning one. Prior to installation and commissioning, please read the instruction manual, are familiar with the micro-electrolysis apparatus, water distribution systems, aeration systems and dosing systems, familiar with the process works. Equipment installation to consider the demolition and replacement of the filler pipe space and maintenance convenience. Access pipeline according to process requirements, reference drawings or process equipment, depending on your willingness to take a good equipment and piping. 2. Commissioning (1) Check the micro-electrolysis apparatus, water distribution systems, aeration systems and dosing system piping system, check valve switch case. Single test carried out according to the operating requirements of the relevant electrical equipment. (2) Turn off the gas, mud pipeline valves, micro-electrolysis apparatus according to the design flow into the water test run to check the situation out of the water piping system. (3) shut out of the water piping system, half-open pipe valves, aeration test 15min. (4) stop aeration, mud valve 1/3 turn, make sludge, slag. (5) dosing system operating reference process requirements. Fifth, use and operation of the device after the installation, commissioning, operation and correct before put into use. 1. Procedure according to process requirements, continuous feed, continuous water. Water for 10 min, open air pipe valve, open fan. 2. Mud based on usage, determine mud cycle. 3. Depending on the consumption of supplementary filler filler filler added regularly.